Ricoh 2400L manual 158, Switch 00 Home position settings

ON/OFF SWITCHES AND USER PARAMETERS TECHNICAL REFERENCE

The user parameter switches are outlined below. (*: Factory setting)

Switch 00 - Home position settings

Digit				Purpose
0	Do not use this setting.
	Contrast home position
1		Digit 2	Digit 1	Setting
		0	0	Normal *
2
		0	1	Lighten
		1	0	Darken
3	Do not use this setting.
4	Resolution	Digit 5	Digit 4	Setting	Digit 5	Digit 4	Setting
		0	0	Standard*	1	0	Fine
5
		0	1	Detail	1	1	Do not use this.
6	Transmission mode			0: Memory Transmission*
				1: Immediate Transmission
7	Halftone			0: Off*	1: On

Switch 01

Digit	Purpose
0 to 6	Do not change these settings.
	If you change any of the contrast, resolution, transmission mode, or halftone settings
7	before making a transmission, then:
	0: The setting(s) will not return to the home position after the transmission.
	1: The setting(s) will return to the home position after the transmission.*

Switch 02 - Printing of various items on received messages

Digit		Purpose
	Mark to be printed at the receiving side to distinguish messages that are sent from
	your machine when it is acting as a forwarding station (Feature Expander required).
0	0: Off	Forwarding Mark
		1: On *
1	Center mark	0: Off*	1: On
	The center mark is not printed when the machine is used for making copies.
2	Do not change this setting.
3	TSI printing	0: Off*	1: On
4 to 7	Do not change these settings.

158