Receiving Automatically in FAX Mode
Your product is preset to FAX mode at the factory. If you have changed the fax mode, take the following steps to receive faxes automatically:
1Press Receive Mode until you see “FAX” on the bottom line. Then press Enter.
2When you receive a call, the product answers the call on a specified number of rings and receives a fax automatically. To change the number of rings. See “Fax Setup Options” on page page 5.41.
To adjust the ringer volume, see “Setting Sounds” on page page 1.41.
Receiving Automatically in ANS/FAX Mode
For this mode, you must attach an answering machine to the EXT jack on the back of your product (see page page 1.8).
1Press Receive Mode until you see “ANS/FAX” on the bottom line. Then press Enter.
2When you receive a call, the answering machine will answer.
If the caller leaves a message, the answering machine stores the message as it would normally. If your product hears a fax tone on the line, it automatically starts to receive fax.
FAX 5.15
