Using Fax Forwarding
You can set your product to forward incoming faxes to another fax number during a specified time period. When the fax arrives at your product, it is stored in memory. Then, your product dials the fax number you have specified and sends the fax.
If it cannot forward a fax after repeated attempts because of an error, such as the number being busy and redials failed, your product will print the fax. If it runs out of memory while receiving a fax, it will terminate the incoming fax and only forward the partial pages already stored in memory.
You can also select the fax forwarding option which allows you to print the fax on your product if fax forwarding is completed without an error.
To use fax forwarding, take the following steps:
1Press FAX Forward.
2Select the fax forwarding option by pressing FAX Forward or
the Scroll buttons ( 
or 
). The following options are available:
FORWARD: forwards the fax to a specified number. Your product does not print the fax.
FORWARD&PRINT: forwards the fax to a specified number and prints the fax on your product.
OFF: turns the fax forwarding off.
3Press Enter to save the selection.
4If you choose to forward faxes, enter the fax number where you would like the fax to go, and then press Enter to save your selection.
5Enter the date using the number keypad you want to start forwarding incoming faxes and then press Enter.
5.18FAX
