1.24
Set Up
Configuring Fax and Internet Gates
If you select SmarThru networking Server option (see page
1.22), when your computer restarts after the Samsung software
has installed, you will be prompted to configure the fax and
Internet gates allowing you to send and receive faxes and e-mails
on the SmarThru system.
If you select the Stand-alone or SmarThru networking Client
option (see page 1.22), the following wizards appear only the first
time you try to launch the Mailbox in the SmarThru program. For
information on SmarThru, please refer to the SmarThru User’s
Guide.)
NOTE:
To configure the Internet gate, you must enter your e-mail
address, incoming (POP3 or IMAP4) and outgoing (SMTP) mail server
address, and account name. Ask your Internet service provider or on-
line service provider for the information on your Internet gate
configuration.
1
When the New Modem Wizard appears, choose the system
modem installed in your system and then click Next. This fax
modem will be used by SmarThru Fax Gate for sending and/or
receiving faxes.
2
Click Finish to save the modem setting.