Basic System Setup
Setting Date and Time
If you are setting up the product for the first time, or if the product has been unplugged for an extended period of time, the LCD display prompts you to set the current date and time.
The current date and time are shown on the display when the product is in Standby mode. The time and date are also printed on all faxes you send.
In Standby mode, you can also access the date and time setup menu any time by taking the following steps:
1Press Setup. The display shows “1.SYSTEM SETUP” on the bottom line.
2Press Enter. The display shows “FAX NUMBER/NAME” on the bottom line.
3Press the Scroll buttons ( 
or 
) until you see “DATE/TIME” and then press Enter. The date currently set for the product are displayed.
