Setting Copy Options
The following buttons on the operation panel let you make all the basic settings: copy quality, contrast, number of copies and copy size.
NOTE: The option settings for the current copy job will be automatically reset to their default status (see 3.15) 2 minutes after the job is completed. If necessary, you can reset the copy option immediately by pressing Cancel/Reset.
Quality
To select the copy quality, use the Quality button on the operation panel. You can select BEST, NORMAL, or DRAFT. The BEST mode is good for documents with fine details. The copy quality is good but the copy speed is low. The NORMAL mode works well for normal documents (text). The DRAFT mode can be used for fast copying with lower resolution.
To select copy quality:
1Press Quality. The current setting is tagged with a 
at the end of the display.
2Scroll through the options available by pressing Quality repeatedly or using the Scroll buttons ( 
or 
).
3When the desired mode is displayed, press Enter to save the selection.
NOTES:
•While the Paper Save mode is enabled, the print quality you selected through the Quality button is ignored and automatically applied to “NORMAL.”
•With an optional photo cartridge installed in the product, if you select the DRAFT setting, the display shows “LOAD BLACK INK” when you start copying and the product cannot print.
3.8Copy
