
Setting Sounds
You can set the following sounds:
•Ringer Volume: You can adjust the ringer volume. Choose from HIGH, MED, LOW, or OFF. OFF setting turns the ringer off.
•Alarm Sound: You can turn the alarm sound on or off. If set to ON, an alarm sounds when an error occurs.
•Key Sound: You can turn the key tone on or off. If set to ON, key tone sounds are heard when a key is pressed.
•Speaker Volume: You can adjust the volume of the earpiece to the desired loudness.
Ringer Volume, Alarm Sound, Key Sound
1Press Setup. The display shows “1.SYSTEM SETUP” on the bottom line.
2Press Enter.
3Press the Scroll/Volume buttons ( or
) until you see the desired sound you want to set and then press Enter. The current setting for the selected sound displays.
4Press the Scroll/Volume buttons ( or
) until you see the desired volume setting on the display and then press Enter to save the selection.
Speaker Volume
1Press OHD. You will hear a dial tone.
2Press the Scroll/Volume buttons ( or
) until you hear the desired loudness. The display shows the selected volume level.
3Press OHD to save the selection and return to Standby mode.