5.42
FAX
5
Choose the desired status by pressing the Scroll buttons (
or ) repeatedly, and then press Enter to save the selection.
6
Repeat to set other data options if necessary.
You can exit from setup mode at any time by pressing
Cancel/Reset.
Selectable Options
These instructions assume you’ve followed the steps under “Setting
an Option” on page page 5.41 and the product is prompting you to
change one of the options listed here.
• SEND FROM MEMORY : If you are annoyed that you have to wait
until documents in the ADF are sent out when you try to send or
reserve another fax, turn this feature on. This feature enables all
transmission documents to be automatically scanned into
memory before transmission.
Select ON to turn this feature on.
Select OFF to turn this feature off.
NOTE:
If you set this option to ON color faxing will be disabled.
• SENDING CONFIRM : A message confirmation report shows
whether the transmission was successful or not, how many pages
were sent, etc.
Select ON to print a confirmation report automatically each time
you send a fax.
Select OFF to turn this feature off.
Select ERROR to print only when an error occurs and the
transmission was not successful.
• FAX PAPER SIZE : Select the paper size you will use for the
recording paper. LETTER, A4, LEGAL sizes are available.
NOTE:
If you set the Auto Reduction menu option, or turned Paper
Save mode on, your product will determine the reduction rate
according to this setting.