Connecting to external Audio Equipment:

Plug in your Hi-Fi equipment to the audio output sockets D if you wish to amplify the audio output from TV. Next , using the menu system, select the “Set Up” menu, enter the “Detail Set Up” menu and set “TV Speakers” to “Off”.

Audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and bass settings can be modified through the “Sound Adjustment” menu.

To enjoy “Dolby Virtual” sound effect through your Hi-Fi equipment:

Place the speakers of your equipment in front of your listening position and beside the TV set but keeping a distance of 50 cm between each speaker and the TV set. Then by using the menu system, select the menu “Sound Adjustment”. Next select “Dolby Virtual” on the “Effect” option.

Left Hi-Fi

Right Hi-Fi

speaker

speaker

~50°

Using Optional Equipment

1

2

3

Connect your equipment to the designated TV

 

 

 

socket, as indicated in the previous page.

 

Your sitting position

 

 

Switch on the connected equipment.

 

 

 

 

 

GB

To watch the picture of the connected equipment, press the

 

button repeatedly until the

 

 

 

correct input symbol appears on the screen.

 

 

 

Symbol

Input Signals

 

 

 

1

• Audio / video input signal through the Scart connector E

 

1

• RGB input signal through the Scart connector E. This symbol appears only

 

 

 

 

if an RGB source has been connected.

 

 

 

2

• Audio / video input signal through the Scart connector F.

 

2

• RGB input signal through the Scart connector F. This symbol appears only

 

 

 

 

if an RGB source has been connected.

 

 

 

3

• Audio/video input signal through the Scart connector G.

 

 

 

 

S 3

• S Video Input signal through the Scart connector G. This symbol appears

 

 

 

 

 

 

 

only if an S Video source has been connected.

 

 

4

• Video input signal through the phono socket B and Audio input signal

 

 

 

 

 

through C.

 

 

 

S 4

• S Video Input signal through the front S Video input jack A and Audio

 

 

 

 

 

 

 

signal through C. This symbol appears only if an S Video source has been

 

 

 

 

connected.

4 Press button on the remote control to return to the normal TV picture.

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select 4 or S 4 input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual Sound” “A” on the sound menu screen.

Additional Information 19