Specifications
2715 Spectrum Analyzer Service Manual 1-19Table1 -5: Input/Output Signal Characteristics (Cont.)
Characteristic Suppl emental InformationPerformanceRequirement
Pin 11:VLVL Output DC output to Option 05 (External
Tracking Generator); typically 9.5 V
with TG level set to ON.
Pin 12: SWPSLOPE Output Negative going ramp output to Opti on 05
(External Tracking Generator); typically
5 V with analyzer set to max span.
Pins 13 through 15 Not used
Digital Communications Port (J104) RS-232 or GPIB connector
Table1 -6: Power Requirements
Characteristic PerformanceRequi rement SupplementalInformation
Input Voltage
Line Voltage Range 90 VAC to 250 VAC
Line Frequency Range 48Hz to 63 Hz
Line Voltage Range 90 VAC to 132 VAC
Line Frequency Range 48Hz to 440 Hz
Line Fuse 2ASlow-Blow
Input Power 90 W (1.2 A) for standard instrument
105 W (1.4 A) maximum with options
(115W maxim um at 90 V and 440 Hz)
At 115V and 60 Hz
Leakage Current 3.5 mARMS maximum or 5 mApeak
maximum
Table1 -7: Supplementary Characteristics Due to Options
Characteristic PerformanceRequi rement SupplementalInformation
Option 03 Provides a GPIB interface port at J104 to
replace RS-232
Option 08 Provides a RS-232 serial interface port at
J104 to replace GPIB
Option 15 Adda1
stLO out put
1st LO Output Level +48.8 dBmV (0.0 dBm) At spectrum analyzer frequencies
100 kHz