55-15 Configuring the GA-1040 and clients for Fiery WebTools

TO SET UP FIERY WEBTOOLS ON A COMPUTER

1.Enable TCP/IP networking.

2.Assign the workstation has a valid, unique IP address, and then set the subnet mask. Set a gateway address if necessary.

3.Install an Internet browser that supports the Java language and frames.

Make sure Java is enabled. See Getting Started for more information on supported browsers and other Fiery WebTools requirements.

TO ACCESS THE FIERY WEBTOOLS

1.Start the Internet browser.

2.Enter the IP address or DNS name of the GA-1040.

3.Press Return.

The GA-1040 home page appears.

4.Select Options from the menu.

5.On the Options window, click the WebTools link.

6.Click the name of a WebTool to use it.

7.Use the Configure button to enable only certain Fiery WebTools for users.

You must log in as Administrator to use the Configure button. You can set this password at the copier Touch Panel Display or in TopAccess.

Page 105
Image 105
Toshiba manual GA-1040 home page appears, 55-15 Configuring the GA-1040 and clients for Fiery WebTools