Toshiba GA-1040 manual Click the Port tab in the Network Setup dialog box

44-6 Setting up the GA-1040 from a Windows Computer

Network Setup

Network Setup configures the GA-1040 to receive print jobs over the networks that are used at your site. If the GA-1040 is configured to enable more than one protocol, it automatically switches to the correct protocol when it receives a print job. When two network ports are enabled, print jobs can be received over all of ports at the same time.

You can modify these Network Setup options:

•Ports—Ethernet or parallel port

•Protocols— TCP/IP, AppleTalk, and IPX/SPX

•Print Services—NetWare printing (PServer), Windows print sharing (SMB), LPD printing (TCP/IP), and HTTP support (WWW)

NOTE: To set up Port 9100 printing, use Setup from TopAccess.

TO CONFIGURE NETWORK PORTS

•Click the Port tab in the Network Setup dialog box.

You can adjust settings as detailed in the following sections.