Toshiba manual Server Setup, Setting up the GA-1040 from a Windows Computer

44-2 Setting up the GA-1040 from a Windows Computer

Server Setup

From this window, you can access Server Setup, Passwords, Job Log Setup, and Support.

Server Setup

Server Name—Specify a name for the GA-1040. This is the name that appears in the Chooser on an AppleTalk network.

Print Start Page—Specify whether the GA-1040 should print a start page when it is turned on or rebooted. The Start Page displays information about the GA-1040, including server name, the current date and time, amount of memory installed, network protocols enabled, and print connections published.

Enable Printed Queue—Specify whether to enable the Printed Queue, a storage location on the GA-1040 disk for recently printed jobs. You can reprint jobs from the Printed queue without sending them to the GA-1040 again. If the Printed queue is not enabled, jobs are deleted from the GA-1040 disk immediately after they are printed.

Jobs Saved in Printed Queue—Specify the number of jobs to be stored in the Printed Queue. Jobs in the Printed queue take up space on the GA-1040 hard disk.

Date and Time—Specify the system date and time, which are used on the cover page and on Job Logs.