Toshiba VF-nC1 instruction manual Press the Enter key to display the setting of the parameter

E6581090

(2) Searching for a history of changes, using the history function (CWJ)

History function (CWJ)

The history function automatically searches for the five parameters set or changed last and displays them in reverse order of setting or change. This parameter can also be used to set or change parameters.

Notes

•Parameters set or changed using the setup parameter also are included among parameters displayed.

•JGCF and GPF are added respectively to the first and last parameters in a history of

4	changes.
	■How to use the history function
	Key operated		LED display	Operation
				Displays the operation frequency (operation stopped).
				(When standard monitor display selection H= is set to
				0 [operation frequency]).
	MON		CWJ	The first basic parameter "History (CWJ)" is displayed.
	ENT		uCEE	Press the ENTER key to search for and display the next
				parameter set or changed last.
	ENT			Press the ENTER key to display the setting of the parameter
				found.
	▲	▼		Change the setting by pressing the △ or ▽ key.
	ENT			Press the ENTER key to confirm the new setting. The name
			⇔CEE	and new setting of the parameter are displayed alternately
				and the setting is saved.
				Similarly, press the △ or ▽ key to display the parameter
	▲ (	▼ )	＊＊＊＊	you want to set or change next, and change and confirm the
				setting.
	▲ (	▼ )	GPF	On completion of a search for all parameters, GPF is
				displayed again.
	MON		Display of parameter
			↓	To abort the search operation, press the MON key. Press the
	MON		CWJ	MON key once during a search to return to setting mode.
			↓	Similarly, by pressing the MON key, you can go back to the
			HTH	status monitor mode and default monitor mode (display of
			↓
	MON			operation frequency).
			

D-8