
E6581090
4.1.6Returning all parameters to standard default setting
Setting the standard default setting parameter V[R to 3, all parameters can be returned to the those factory default settings.
Note: For more details on the standard default setting parameter V[R, see 5.3.
Notes on operation
•We recommend that before this operation you write down on paper the values of those parameters, because when setting V[R to 3, all parameters with changed values will be returned to standard factory default setting.
■Steps for returning all parameters to standard default setting
Key operated | LED display | Operation | |||
|
|
| Displays the operation frequency (perform during operation | ||
|
|
| stopped). | ||
|
|
|
| ||
| MON | CWJ | The first basic parameter "History (CWJ)" is displayed. | ||
|
|
|
| ||
▲ | ▼ | V[R | Press the △ key or the ▽ key to change to V[R. | ||
|
|
|
|
| |
|
|
|
| Pressing the ENTER key displays the programmed | |
| ENT | parameters. (V[R will always display zero "" on the | |||
|
|
|
| right, the previous setting on the left.) | |
▲ | ▼ | Press the △ key or the ▽ key to change the set value. To | |||
return to standard factory default setting, change to "". | |||||
|
|
|
| ||
| ENT | KPKV | Pressing the ENTER key displays "KPKV" while returning | ||
| all parameters to factory default setting. | ||||
|
|
|
| ||
|
| P | Turn the power on. | ||
|
|
|
|
| |
▲ | ▼ | P | Select a parameter among P, R and P, using | ||
the △ and ▽ keys. Select P in this case. | |||||
|
|
|
| ||
|
|
|
| Press the ENTER key to confirm your change. | |
| ENT | KP KV | When KP KV is displayed, you can set the setup | ||
|
|
|
| parameter. | |
|
|
| The operation frequency is displayed (Standby). | ||
|
|
|
|
| |
|
|
| The operation frequency is displayed again. | ||
|
|
|
|
|
If there is something that you do not understand during this operation, press the MON key several times and start over again from the step of CWJ display.
4