Toshiba VF-nC1 instruction manual Table of output terminal functions

E6581090

■Table of output terminal functions 1

Function	Code	Function	Action
No.
0	LL	Frequency lower limit	ON : Output frequency higher than NN setting
			OFF : Output frequency equal to or lower than NN
			setting
1	LLN	Inversion of frequency lower limit	Inverse output of LL
2	UL	Frequency upper limit	ON : Output frequency equal to or higher than WN
			setting
			OFF : Output frequency lower than WN setting
3	ULN	Inversion of frequency upper limit	Inverse output of UL
		Low-speed detection signal	ON : Output frequency equal to or higher than
4	LOW		H setting
			OFF : Output frequency lower than H setting
5	LOWN	Inversion of low-speed detection	Inverse output of LOW
		signal
		Designated frequency reach	ON : Output frequency within command frequency
6	RCH		±2.5Hz
		signal (completion of
			OFF : Output frequency exceeding command
		acceleration/deceleration)
			frequency ±2.5Hz
		Inversion of designated
7	RCHN	frequency reach signal (inversion	Inverse output of RCH
		of completion of
		acceleration/deceleration)
8	RCHF	Set frequency reach signal	ON : Output frequency within H setting ±2.5Hz
			OFF : Output frequency exceeding H setting
			±2.5Hz
9	RCHFN	Inversion of set frequency reach	Inverse output of RCHF
		signal
10	FL	Failure FL (trip output)	ON : Inverter trips
11	FLN	Inversion of failure FL (inversion	Inverse output of FL
		of trip output)		11
12	OT	Over-torque detection	ON : Torque current is held above the torque set with
			H for a period of time longer than that set
			with H.
13	OTN	Inversion of over-torque	Inverse output of OT
		detection

K-11