SCANNING WITH EVENT FORWARDING 103

SCANNING WITH EVENT FORWARDING

If you want to specify an application to use for scanning at the start of the process, you can use event forwarding. The scanner will feed in the first page, but will then stop until you select the application to use. After you select the application, its interface will open and you can use it to continue with the scanning.

To scan with event forwarding:

1.Open the OneTouch Properties window.

2.Select Still Image Client as the Destination Application.

If Still Image Client is not listed as a Destination Application, click the Options tab, select Sti event forwarding, then click Apply and click the PaperIn button again.

Note that you cannot choose a format for this option because the actual Destination Application is not selected until after the scanner feeds in the first page of your document.

3.Choose a Scan Configuration.

4.Click Apply or OK.

Page 110
Image 110
Visioneer XP220 manual Scanning with Event Forwarding, To scan with event forwarding