122VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
4.Select TWAIN: Visioneer Strobe XP 220.
The WIA: Visioneer Strobe XP 220 option is for using the WIA interface.
5.Click OK.
A Confirm Selection message box opens.
6.Click OK on the message box.
Note: Please wait a few moments for your selection to become active. This delay only occurs the first time you select a scanner while PaperPort initializes it. Later on, the scanner initializes immediately when you select it.
Note: If the Scan button at the bottom of panel is not available when you make a selection, then your scanner needs to be set up to work with PaperPort. See the section, “Setting Up Your Scanner to Work with PaperPort” on page 129.
7.Make sure the option Display scanner dialog box is selected.
If this option is not selected, the TWAIN interface will not open when you click the Scan button. Instead, the items are scanned with the PaperPort scan profile selected on the Scan Pane.
8. Click the Scan button on the Scan Pane.
The TWAIN interface opens. You’re ready to start scanning.
