Visioneer XP220 manual Scan Using Onetouch

SCAN USING ONETOUCH 29

SCAN USING ONETOUCH

1.Align the document between the alignment arrows and insert it, face up, into the page feed slot.

2.The AutoLaunch technology senses that a document is inserted into the page feed and starts the scanning. The scanner rollers will grab the top edge of the paper and begin to scan and feed the document through the scanner.

Note: You can turn the AutoLaunch feature off. See the section, “How to Turn AutoLaunch Off/On” on page 152.

3.The item is scanned using predefined settings from the OneTouch software. To change OneTouch settings, see “Selecting New OneTouch Scan Settings” on page 39.

4.A window shows the image as scanning is in progress. Then, when scanning is finished, the image is sent to the Destination Application selected in the OneTouch settings. In the following example, the Destination Application is the PaperPort desktop.