Visioneer XP220 manual How To Replace The Plug Adapter, To remove and replace an adapter

HOW TO REPLACE THE PLUG ADAPTER 151

HOW TO REPLACE THE PLUG ADAPTER

The three plug adapters you received with your scanner means you can use the power supply with electrical outlets in different countries.

To remove and replace an adapter:

1.Unplug the power supply from the wall outlet.

2.Press down on the latch that holds the adapter in place.

3.While keeping the latch pressed down, slide the adapter down and off the power supply.

4.To place a new adapter on the power supply, use the procedure described on page 12 of this User’s Guide.