4VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Installing
Installation is a quick,
■Install the PaperPort software and scanner driver
■Connect the power supply and USB cable
■Calibrate the scanner
BEFORE YOU BEGIN
■If your computer has AntiVirus or AntiSpyware software running, you may see messages during installation asking you to allow the installation to proceed. Although the messages will differ based on the software your computer is running, in each case you should allow the installation to proceed. Alternatively, you can turn off the AntiVirus or AntiSpyware software before installing your scanner, but make sure to turn it back on again when installation is finished.
■If you already have a scanner connected to your computer, it is recommended that you remove that scanner’s driver program prior to installing your Visioneer Strobe XP 220 scanner. While in some cases you can configure your computer to have another manufacturer’s scanner operational on your computer in conjunction with the Visioneer scanner, we do not recommend this configuration as you may lose some of the driver functionality on one, or both of the units. You can remove these programs from the Windows Add/Remove Programs list. Please refer to the user manual provided with your other scanner for instructions about removing the driver and software for that unit.
■The information in this guide may cover software not provided with the scanner you purchased. Please disregard any information about the software not applicable to your scanner.
■If your computer is running Windows Vista, you may see the Vista User Access Control screen asking you to confirm system changes. Click the Continue button to allow the installation to proceed.
