Safety notices
Ozone safety
This product produces ozone during normal operation. The ozone produced is dependent on copy volume and is heavier than air. Providing the proper environmental parameters as specified in the Xerox installation instructions ensures that concentration levels meet safe limits.
Operation safety
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements. These include safety agency examination and approval, and compliance to established environmental standards.
Attention to the following notes ensures the continued safe operation of your equipment.
•The system is heavy. Ensure that the floor is level and strong enough to support the weight of the system.
•Do not place the system near a heat source.
•To move the system, call a Service Representative.
•Do not use an extension cord. Always connect the system power cable to a properly grounded power source receptacle. If in doubt, have the receptacle checked by a qualified electrician.
•Do not use an adaptor plug to connect the system to an electrical outlet that lacks a ground connection terminal.
WARNING: Improper connection of the equipment grounding conductor can result in risk of electrical shock.
•Do not locate the system where people may walk on the system power cable. Do not place objects on the system power cable.
•Never override or disable electrical or mechanical interlocks.
WARNING: Do not push objects into slots and openings on the system. Making contact with a voltage point or shorting out a part could result in fire or electrical shock.
•If you hear unusual noises or smell strange odors, switch off the system power immediately. Disconnect the system power cables from the electrical outlet and call a service representative.
•Do not place containers of coffee or other liquids on the system.
•Switch off the system power, disconnect the power cables, and call a service representative when any of the following conditions occur:
DocuTech 128/155/180 HighLight Color Operator Guide |
