Xerox 128 manual Unlatching the CCU

Routine maintenance

5.Slide the stand toward the machine to engage the pins with the holes and the slot. The end of the service stand may need to be lifted slightly to ensure pin engagement.

6.With the service stand in position against the machine and the pins engaged in the docking bracket, engage the locking mechanism by applying a force forward on the lever and compressing the latch spring while turning it to the position shown.

7.Locate the pin squarely to the machine by ensuring that the two (2) locating pins in the service stand are in contact with the docking bracket.

8.With the service stand properly located to the machine and while observing the level, turn the rear jack screws to adjust the height of the service stand so that it is level.

9.Tighten the lock nuts on the jack screws to lock the jack screws in position.

10.Unlatch the CCU by turning the photoreceptor backup roller handle clockwise for a quarter turn to an upright position.

Figure 3-19 Unlatching the CCU

3-2 2 DocuTech 128/155/180 HighLight Color Operator Guide