Xerox 128 manual Limitations, Common US paper sizes

Technical information

displayed on the DocuSP controller to warn the Print Services Operator that the paper stock to be rotated will not fit in the Bypass Transport.

The Signature Booklet Maker attached to a DocuTech 128/155/ 180 HLC printer is only capable of handling paper stock up to 9 inches (229 mm) in length in a portrait orientation.

With the introduction of other DFA-complaint finishing devices for use with the DocuTech 128/155/180 HLC family of printers, additional paper stock sizes can be handled by the finishing devices, both straight from the Bypass Transport or rotated.

Limitations

Do not rotate paper sizes that will not fit through the DocuTech 128/155/180 HLC Bypass Transport to a third party finishing device.

Before creating a document to be rotated by the Bypass Transport, set the paper stock size required to fit within the limitations detailed in the following tables and as follows:

•The diagonal dimension of the paper stock must be equal to or less than 18 inches (457 mm).

•The paper stock must be within the paper stock size parameters of the DocuTech 128/155/180 HLC printer paper trays.

Refer to the DocuSP controller on-line help system for information on setting finisher devices and finisher profiles to enable rotation to a third party finisher.

Table 5-8. Common US paper sizes

Common	Inches x	Millimeter		Can be	Comment
			Diagonal in inches		(similar to or the
size name	inches	equivalent		rotated
					same as)
	8.0 x 10.75	203 x 273	13.40	YES
US Letter/ US	8.5 x 11.0	216 x 279	13.90	YES	2-up of US 5.5 x
A-size					8.5 in.
					(statement)
	9.0 x 12.0	229 x 305	15.00	YES	2-up of US 6.0 x
					9.0 in. (common
					“book” size)
US Legal	8.5 x 14.0	216 x 356	16.38	YES	ISO Foolscap
	9.0 x 14.0	229 x 356	16.64	YES	2-up of US 7.0 x
					9.0 in.
	9.0 x 15.0	229 x 381	17.49	NO*	2-up of US 7.5 x
					9.0 in.

5-1 2 DocuTech 128/155/180 HighLight Color Operator Guide