Xerox 128 manual Paper stock rotation, Background, Stock length impact on system performance

Technicalinformation

Table 5-7. Stock length impact on system performance

Stock length	Impact on performance
Over 11 inches (279	The transfer assist mechanism is preset to
mm) to less than	optimize image transfer for the exact stock
11.7 inches (297	lengths of 11 inches (279 mm), 11.7 inches
mm)	(297 mm), 13 inches (330 mm), and 14 inches
Over 11.7 inches	(356 mm). Stock lengths falling between these
(279 mm) to less	exact lengths present an increased risk for
than 13 inches (330	bottom-edge deletions.
mm)
Over 13 inches (330
mm) to less than 14
inches
(356 mm)
Over 14 inches (356
mm)
14.33 inches (B4	Background, smudging, or white spaces may
JIS)	occur when printing between the 14 inch area
	and the edge of the paper.
10 inches (254 mm)	Because the 11 inch transfer mechanism is
to less than 11	used for all stock lengths less than 11 inches
inches (279 mm)	(279 mm), there is an increased risk of
	contaminating the back side of sheets after
	switching back to longer stock.
11.2 inches (284	Unresolved stock size mismatch conflict
mm) to less than	messages may occur for stock lengths in these
11.5 inches	ranges. Job and stock programming work-
(292 mm)	arounds may be required.
11.9 inches (302
mm) to less than
12.2 inches (310
mm)
13.5 inches (343
mm) to less than
13.7 inches (348
mm)

Paper stock rotation

This section identifies the limitations on the rotation of paper stock in the DocuTech 128/155/180 HLC Bypass Transport when using a third-party finishing device.

Background

Due to the physical limitations of the DocuTech 128/155/180 HLC Bypass Transport, some paper stocks will be damaged or will jam while being rotated. Currently, when using an external finishing device that is not a Signature Booklet Maker, there is no message

DocuTech 128/155/180 HighLight Color Operator Guide 5- 11