Xerox 128 manual Top tray satisfaction guide

			Technicalinformation
Table 5-12. Binder satisfaction guide
Stock	Reliable stacking may be	Less reliable stacking may	Suggested alternatives
	expected	be expected
Set size limits	Maximum collated:	125 sheets of substance 16	Consider stitching for set sizes
	125 sheets of substance	(60 g/m2)	smaller than 15 sheets (or
	20 (75 g/m2) or equivalent		equivalent thickness).
	thickness		Reduce the number of sheets
	Minimum collated:		to maintain a maximum set
	15 sheets of substance 20		thickness of 0.5 inch (13 mm)
	(75 g/m2) (7 sheets with		when using heavier than
	index covers) or		substance 20 (75 g/m2) for
	equivalent thickness		main body or inserts.
	Maximum uncollated:
	100 sheets of substance
	20 (75 g/m2)
	Minimum uncollated:
	15 sheets of substance 20
	(75 g/m2) (7 sheets with
	index covers) or
	equivalent thickness
Stacker	Delivers 12 sets inboard		To allow continuous run,
capacity	and 12 sets outboard		unload outer stack before
			inner stack reaches capacity.
Type or	Xerographic bond paper in	Slightly curled paper	Avoid the following:
condition	good condition		Coated papers
	Drilled paper		Drilled stock with reinforced
			edges
			Transparencies as inserts
			Excessively curled paper
			Never-tear paper
			Stock not defined here is
			included in the “Using various
			stocks” section in this guide.
Table 5-13. Top tray satisfaction guide
Stock	Reliable stacking may be	Less reliable stacking may	Suggested alternatives
	expected	be expected
Size	8 x 10 inches to 11 x 17	Intermixed sizes	Smaller or larger sizes cannot
	inches (203 x 254 mm to		be used.
	279 x 432 mm)
Weights	Substance 16 to 110 (60 to	Substance 16 (60 g/m2)	Weights outside the limits
	200 g/m2)	over 9 x 14 inches (229 x	shown are not recommended.
	Weights cannot be	356 mm) may yield stacking
	intermixed	registration problems.
Capacity	500 sheets, substance 20		If using a paper heavier than
	(75 g/m2) or less		substance 20 (75 g/m2),
	415 sheets, substance 24		unload the tray before the
	(90 g/m2)		count in the tray reaches 500.
	310 sheets, substance 32		Check the stitch quality.
	(120 g/m2)
	225 sheets, substance 110
	(200 g/m2)

DocuTech 128/155/180 HighLight Color Operator Guide 5- 17