Xerox 128 manual Replacing the pin

Routinemaintenance

8.Install the new stitcher spool.

a.Slide the new stitcher spool into position with the paper wrapper still in place.

b.Replace the stitcher spool pin. Push it down until it locks into place, as shown in figure 3-57.

Figure 3-57 Replacing the pin

9.Remove any damaged wire.

WARNING: Hold the wire on the spool to prevent eye injury and to keep the wire from unwinding.

a.Locate the end of the wire on the new spool.

b.Using the wire cutters, carefully clip any bent or twisted wire from the lead end of the wire.

c.Hold onto the end of the wire and carefully remove the paper wrapper, as shown in figure 3-58.

DocuTech 128/155/180 HighLight Color Operator Guide 3- 57