Xerox 128 manual Locating the binder tape knob

Routine maintenance

Figure 3-70 Locating the binder tape knob

The knob is spring loaded and moves in increments to change the location of the binder tape. Each increment equals a change of 0.1mm, up or down, on the edge of the book. One full rotation of the knob is equal to 0.04 inch (1mm).

6.Pull the knob toward you to rotate it for the adjustment.

7.Adjust the tape position by performing one of the following steps:

•Pull the knob and rotate it clockwise to move the tape toward the top edge of the book, as shown in figure 3-71.

3-6 6 DocuTech 128/155/180 HighLight Color Operator Guide