Xerox 128 manual Technicalinformation

	Technicalinformation
Stock Type	Instructions for use
3 hole drilled, edge	Do not stitch or bind. Do not run with tabs.
reinforced, 4024 DP	Tabs can be inserted off-line.
paper	For optimum satisfaction, use the paper trays
	1 and 2 plate assembly. The plate assembly
	can be ordered by a Customer Service
	Representative. Up to 500 sheets can be
	placed in the tray.
	Load the paper into all trays with holes to the
	left, reinforced side down.
	Select <Properties...> on the Trays pull-
	down menu. On the Stock window, under
	Type, select <Drilled>.
	Image quality problems may occur near the
	reinforcement with side 2 printing.
	Remove the paper immediately before use to
	ensure that prints stay flat.
	Print with no more than 200 sheets in a tray.
	Select a quantity of 50 or fewer at a time.
Transparencies with a	Load the stock with the white stripe to the
0.5 inch (13 mm) white	right into trays 1 and 2.
stripe	Load the shiny side up for optimum
	performance.
Removable stripe	Do not load more than 50 removable-stripe
transparencies	transparencies into trays 1 and 2.
	With the white stripe to the right, place the
	transparencies on top of approximately 50
	sheets of paper in the tray.
	Do not run as inserts to a bound job. Printing
	is not allowed on inserts.
Tabs	Mylar tabs should be run out of tray 4.
Preprinted stock	Preprinted forms must be made up of ink that
	has the following characteristics:
	Can withstand temperatures up to 400°F
	(204°C)
	Can withstand pressure of 140 psi at the
	above temperature
	Can withstand the above conditions for 25
	milliseconds
High speed	Load the stock with the stripe to the right in
transparencies with	trays 1 and 2.
white stripe
Label stock	Load the stock face up into trays 1 and 2;
	face down into trays 3, 4, and 5.
	Do not select 2-sided prints.
Letterhead (preprinted)	Load the paper into trays 3, 4, and 5; side 1
	with the printed side down, top edge to the
	front of the tray.
	Load the paper into trays 1 and 2; side 1 up
	with the top edge to the front of the tray.
	Do not use freshly preprinted paper in trays 1
	and 2.

DocuTech 128/155/180 HighLight Color Operator Guide 5- 9