Xerox 128 manual Electronic reprographics process, DocuSP controller DocuTech Printer

2 System components

The Xerox DocuTech HLC printers are electronic reprographics systems. They are high volume printers available in multiple configurations. These versatile, high performance printing systems enable personal computers and other network-connected devices (such as workstations and graphic scanners) to produce documents incorporating graphics, forms, logos, signatures, and fonts.

Electronic reprographics process

The Xerox DocuTech HLC system consists of a DocuSP controller and a DocuTech printer.

DocuSP controller

The DocuSP controller accepts electronic print input created by client software in ASCII, TIFF, HP PCL, PostScript, PPML, LCDS, IPDS, VIPP or PDF format. This print input is passed on to the system through a network connection. The DocuSP software performs the necessary data conversion, creating an electronic file which is stored temporarily in a print queue on the DocuSP controller. This electronic image is then passed directly on to the printer for production.

DocuTech Printer

The DocuTech 180 prints up to 180 prints per minute using 8.5 x 11 inch/A4 (216 x 279 mm) stock.

The DocuTech 155 prints up to 155 prints per minute using 8.5 x 11 inch/A4 (216 x 279 mm) stock.

The DocuTech 128 prints up to 128 prints per minute using 8.5 x 11 inch/A4 (216 x 279 mm) stock.

NOTE: The DocuTech HLC prints in black and white plus one highlight color.

NOTE: Prints per minute vary, depending on paper size, for all printers.

DocuTech 128/155/180 HighLight Color Operator Guide 2-1