Xerox 128 manual Using the custom transfer assist blade, Positioning the stack

Routinemaintenance

For stock outside the recommended limits, refer to the "Technical information" chapter in this guide.

Figure 3-4 Positioning the stack

8.Move the rear guide forward until it touches the edge of the stack.

9.Lower the feed belt.

10.Close the tray slowly, but firmly, until it latches.

Using the custom transfer assist blade

The custom transfer assist blade in the printer assures good print quality for your jobs. A kit is available allowing you to customize the transfer assist blade for use with nonstandard paper sizes.

You cannot use the custom transfer assist blade for print jobs that use more than one paper size. In addition, the following paper lengths cannot use the blade:

DocuTech 128/155/180 HighLight Color Operator Guide 3- 7