Xerox 128 manual Satisfaction guide for paper trays 3, 4, 5

Technical information

Stock	Reliable feeds may	Less reliable feeds may be	Suggested alternatives
	be expected	expected
Weight	Substance 16 to 110		Weights outside the limits shown
	(60 to 200 g/m2)		are not recommended.
			Substance 110 (200 g/m2) must
			be long grain except 17 x 11 inch
			(432 x 279 mm) substance 110
			(200 g/m2) which must be short
			grain.
Capacity	550 sheets, substance
	20 (75 g/m2)
Type or	Xerographic bond	Slightly curled paper	Do not use excessively curled
condition	paper in good	Intermixed weights	paper
	condition	Xerox vellum	Substance 110 (200 g/m2) must
	Drilled stock, fanned	Full cut tabs	be long grain. Do not use short
	thoroughly	Label stock	grain.
		Adhesive drafting film	Refer to the “Using various
		Paper with reinforced edges	stocks” section for any stock not
			defined in this guide.

Table 5-3. Satisfaction guide for paper trays 3, 4, 5, and 6

NOTE: High volume printer configuration only

Stock	Reliable feeds may	Less reliable feeds may be	Suggested alternatives
	be expected	expected
Size	8 x 10 inches to 17 x		Smaller or larger sizes cannot be
	11 inches (203 x 254		used.
	mm to 432 x 279 mm)
Weight	Substance 16 to 110		Weights outside the limits shown
	(60 to 200 g/m2)		are not recommended.
			Substance 110 (200 g/m2) must
			be long grain except 17 x 11 inch
			(432 x 279 mm) substance 110
			(200 g/m2) which must be short
			grain.
Capacity	2600 sheets,
	substance 20 (75 g/
	m2)

5-6 DocuTech 128/155/180 HighLight Color Operator Guide