Xerox 128 manual Interposer problems, Finisher problems, Resolving a finisher problem

Models: 128

1 174
Download 174 pages 57.46 Kb
Page 137
Image 137

ProblemSolving

Interposer problems

 

NOTE: Production publisher configuration only

 

Table 4-2. Resolving an interposer problem

 

 

Problem

Suggested solutions

 

 

Repeated jams in

Follow the jam clearance diagram in the Printer Fault Clearance

interposer

window carefully to ensure all paper has been cleared.

 

Make sure the stock in trays 4 and 5 have been loaded correctly.

 

Refer to the Satisfaction guides in chapter 4, “Technical

 

Information”, for information on loading stock in trays 4 and 5.

 

Make sure the stock in trays 4 and 5 meet the specifications for

 

these trays as indicated in the Satisfaction guides in chapter 4,

 

“Technical Information”.

 

 

Finisher problems

NOTE: Production publisher configuration only

Table 4-3. Resolving a finisher problem

Problem

Suggested solutions

 

 

Repeated jams in

The bindexer contains three bins used by the system to sort sets.

area 14 (bindexer)

The capacity of each bin is 125 sheets of substance 20 (75 g/m2) or

 

0.5 inch (13 mm) thickness.

 

Include inserts and covers when considering the output capacity of

 

the bindexer.

 

125 sheets of substance 20 (75 g/m2) is equal to approximately:

 

104 sheets of substance 24 (90 g/m2)

 

78 sheets of substance 32 (120 g/m2)

 

47 sheets of substance 110 (200 g/m2).

 

Check that the sets in the bindexer are less than 0.5 inch (13 mm)

 

thick.

 

If the set exceeds 0.5 inch (13 mm) thickness, reprogram the job for

 

fewer sheets or reduce the number of heavy-weight sheets.

 

When running collated, unfinished sets, the maximum sheet

 

capacity of the bindexer can be set between 50 and 125.

 

When running anything other than collated, unfinished sets, the

 

maximum sheet capacity of the bindexer will remain at 125.

 

 

Jammed binder

Replace the tape reel with a new reel using the procedure,

tape, such as binder

"Replacing the binder tape reel," in this guide.

tape sticking

Refer to the binder tape reel storage information in this guide.

together, or

 

cosmetic defects in

 

the bound book

 

 

 

DocuTech 128/155/180 HighLight Color Operator Guide

4- 23

Page 137
Image 137
Xerox 128 manual Interposer problems, Finisher problems, Resolving a finisher problem