![](/images/new-backgrounds/1194646/19464669x1.webp)
System components
The stacker
NOTE: Production publisher configuration only
The stacker collects unfinished or finished stitched or bound jobs. When the stacker is full, or the job is completed, the stacker door opens and the stacker drawer that holds the prints comes out.
After the stacker drawer is unloaded, the system retracts the drawer and closes the door. The stacker also can be unloaded during the printing cycle to check the quality of the print sets by changing the printer options.
NOTE: For more information, refer to the
The binder
NOTE: Production publisher configuration only
When a job requires bound output, a length of
NOTE: For information about adjusting the binder tape registration and the binder tape length, refer to the
The top tray
NOTE: Production publisher configuration only
Prints are delivered to the top tray because the prints are oversized or because the top tray was selected on the screen.
The bypass transport device is not available for this configuration (four feeder/stacker modules).
The printer is available in a Production configuration which includes a
Bypass transport
The printing system is available in several configurations, and may be configured with a bypass transport.
Function of the The bypass transport moves paper from the stacker to a third-
bypass transport party finisher such as a stitcher, booklet maker, tape binder, and so on. By making selections on the user interface windows, you can program the printer to send output to the bypass transport, which feeds the output to the finishing equipment.
Paper stocks The bypass transport accepts all paper stocks on which the printer
supported on can print, and it accommodates simplex and duplex printing. bypass transport
DocuTech 128/155/180 HighLight Color Operator Guide | 2- 17 |