Xerox 128 manual Stock satisfaction guides, Satisfaction guide for paper trays 1

Technicalinformation

			the curl in the paper, refer to the “Routine maintenance” and
			“Problem solving” sections of this guide.
	Stock satisfaction guides
		Table 5-1. Satisfaction guide for paper trays 1 and 2
Stock		Reliable feeds may	Less reliable feeds may be	Suggested alternatives
		be expected	expected
Size		8 x 10 inches to 9 x 14		Stock smaller than 8 x 10 inches
		inches (203 x 254 mm		cannot be used.
		to 229 x 356 mm)		For stock larger than 9 x 14
				inches (229 x 356 mm), refer to
				the tray 3 satisfaction guide.
Weight		Substance 20 to 110	Substance 16 to 19 (60 to 72 g/	Weights outside the limits shown
		(75 to 200 g/m2)	m2)	are not recommended.
				Substance 110 (200 g/m2) must
				be long grain. Do not use short
				grain.
Capacity		Tray 1 - 1100 sheets,		For greater capacity, use tray 3.
		substance 20 (75 g/
		m2)
		Tray 2 - 600 sheets.
		substance 20 (75 g/
		m2)
Type or		Xerographic bond	Slightly curled paper intermixed	Do no use excessively curled
condition		paper in good	weight Transparencies Label	paper.
		condition Drilled	stock Adhesive drafting film	Substance 110 (200 g/m2) must
		stock, fanned	Paper with reinforced edges	be long grain Do not use short
		thoroughly Tab stock		grain.
		in perfectly flat		Use transparencies with a white
		condition		stripe. Freshly printed offset
				prints, use tray 3.
				Refer to the “Using various
				stocks” section for any stock not
				defined in this guide.
		Table 5-2. Satisfaction guide for paper tray 4 Interposer ONLY
		NOTE: Production publisher configuration only
Stock		Reliable feeds may	Less reliable feeds may be	Suggested alternatives
		be expected	expected
Size		8 x 10 inches to 17 x		Smaller or larger sizes cannot be
		11 inches (203 x 254		used.
		mm to 432 x 279 mm)

DocuTech 128/155/180 HighLight Color Operator Guide 5- 5