Xerox 128 manual General paper characteristics, Graphical user interface overview

System components

•Predrilled paper: Has holes for use in binders or binder rings. Before loading predrilled paper, fan it to remove any loose plugs that could cause paper jams.

•Perforated paper: Have been pierced with one or more rows of holes to permit easy tearing or separating into sections. Read and follow the instructions on the ream packaging.

•Precut or full tabs

•Carbonless paper: Is paper that is treated or coated to produce an image under pressure (without the use of carbon paper). After opening, close and seal the original ream wrapper to store. Do not leave in paper trays overnight. Read and follow the instructions on the ream packaging.

General paper characteristics

When selecting paper, look for the following:

•Low moisture content (a paper to moisture ratio below 5.7 percent). Paper with higher moisture content may curl and jam.

•Smooth surface

•Moisture resistant wrapping

•No defects such as bent edges or uneven surfaces

•Grain runs parallel with the long side of paper

Graphical user interface overview

The graphical user interface (GUI) on the controller enables you to interact with the printing system. It contains windows, icons, and menus through which you can issue commands and perform operation and system administration tasks.

When the workstation controller is powered on and booted, the DocuSP Print Services main menu displays on the controller screen.

DocuTech 128/155/180 HighLight Color Operator Guide 2- 5