Xerox 128 manual Clearing the Q1202 and Q1203 sensors, Locating the Q1201 sensor

Routinemaintenance

Figure 3-37 Locating the Q1201 sensor

3.Brush a folded sheet of paper under the sensor to clear any obstructions.

4.Close the processor cover.

Clearing the Q1202 and Q1203 sensors

NOTE: Production publisher configuration only

Clearing the Q1202 and Q1203 sensors should be performed only when directed by a Customer Support Center Representative.

1.Open the finisher top cover.

2.Locate the Q1202 and Q1203 sensors, as shown in figure 3- 38.

DocuTech 128/155/180 HighLight Color Operator Guide 3- 41