Xerox 128 manual Customer Support Center, Checking paper curl

Problem Solving

Checking paper curl

You can adjust the decurler lever to correct most paper curl problems. Refer to the paper curl chart, later in this chapter, to determine the amount of curl in the paper stock.

Perform the following to measure paper curl:

1.Print five one sided (simplex) 8.5 by 11 inch or A4 sheets.

2.Hold the printed sheets by the top center of the short edge, keeping the image toward you.

Figure 4-28 Paper curl chart

3.Place the bottom edge of the prints over the paper curl measurement chart on the line that best represents the curve of the sheets.

•If the curl on the printed paper stock measures between +2 and -2, do not change the decurler setting.

•If the curl is between +2 and +3, or -3 and -4, adjust the decurler lever.

Customer Support Center

Before calling the Customer Service Support Center for service, ensure you have read this information and have tried the corrective actions described here. If the problem persists, gather the necessary information (details follow) and call the appropriate Customer Service Support Center phone number. Your site

4-3 0 DocuTech 128/155/180 HighLight Color Operator Guide