Xerox 128 Clearing the Q1205, Q1206, and Q1207 sensors, Locating the Q1222 and Q1210 sensors

Routine maintenance

Figure 3-41 Locating the Q1222 and Q1210 sensors

4.Wipe each sensor gently with a soft cloth to clean them.

5.Close the finisher top cover.

Clearing the Q1205, Q1206, and Q1207 sensors

NOTE: Production publisher configuration only

Clearing the Q1205, Q1206, and Q1207 sensors should be performed only when directed by a Customer Support Center Representative.

1.Open the finisher front doors.

2.Open the bindexer door.

3.Locate the Q1205, Q1206, and Q1207 sensors, as shown in figure 3-42.

3-4 4 DocuTech 128/155/180 HighLight Color Operator Guide