Xerox 128 manual Cleaning the Q1222 and Q1210 sensors, Locating the Q1222 and Q1210 sensors

Routinemaintenance

Cleaning the Q1222 and Q1210 sensors

NOTE: Production publisher configuration only

Cleaning the Q1222 and the Q1210 sensors should be performed only when directed by a Customer Support Center Representative.

1.Open the finisher top cover.

2.Look down at the rear section of the tilt bed area, as shown in figure 3-40, to view the sensors.

Figure 3-40 Locating the Q1222 and Q1210 sensors

3.Locate the Q1222 and Q1210 sensors, as shown in figure 3- 41

DocuTech 128/155/180 HighLight Color Operator Guide 3- 43