Xerox 128 manual Satisfaction guide for various stocks, Stock Type Instructions for use

Technical information

Table 5-5. Satisfaction guide for various stocks

Stock Type	Instructions for use
Substance 13	Use trays 3,4,or 5.
(49 g/m2) paper	Do not run 2-sided prints.
	Load the paper with seam side down into tray
	3.
	Optimum satisfaction can be expected with
	8.5 x 11 inch (216 x 279 mm) or larger paper.
Substance 16 (60 g/	Load paper with seam side up into trays 1
m2) paper	and 2; seam side down into tray 3, 4, or 5.
	Optimum satisfaction can be expected from
	tray 3, 4, or 5.
Substance 20 (75 g/	Load the paper with seam side up into trays 1
m2) paper	and 2; seam side down into trays 3, 4, and 5.
Card stock	Card stock can be run from any tray.
Xerox substance 65	Reduce set size if frequent paper jams or
(176 g/m2)	bindexer jams occur. If collated unfinished,
Substance 110 (200 g/	another solution is to lower the value of the
m2) long grain (index)	bindexer capacity set in the SWITCHES
	mode.
Xerox 4024, substance	Load the paper into trays 1 and 2 with holes
20	to the right; load the paper into trays 3, 4, and
(75 g/m2)	5 with holes to the left.
3 hole drilled	Use the Image Shift or Reduce/Enlarge
4 hole drilled	options to avoid printing near the holes.
7 hole drilled	Fan the paper and check the paper for loose
	paper plugs before loading the paper into the
	trays.
Never-tear, 3 hole	Load the paper into trays 1 and 2 with holes
drilled	to the right; load the paper into trays 3, 4, and
	5 with holes to the left.
	Do not bind or run 2-sided prints.
Never-tear	Do not bind or run 2-sided prints.

5-8 DocuTech 128/155/180 HighLight Color Operator Guide