Xerox 128 Trays 3, 4, 5, and 6 high-capacity trays 2600 sheets each, Ready to Open, Indicator

System components

Processor feeder/ Two processor feeder/paper trays (trays 1 and 2) are located in

paper trays the main part of the printer.

Trays 1 and 2 can handle paper sized from 8 by 10 inches / 203 by 254 mm to 9.02 by 14.02 inches / 230 by 356 mm.

Feeder/paper tray Depending on your configuration, the feeder/paper trays have the

capacity following capacities, based on 20 pound or 80 gsm (grams per square meter) paper:

Tray 1: 1100 sheets

Tray 2: 600 sheets

Trays 3, 4, 5, and 6 (high-capacity trays): 2600 sheets each

An elevator moves each tray up or down when it is in use. In each tray, a control panel consisting of a button, indicators, and paper level displays controls the elevator tray and indicates its status.

Figure 2-3. Feeder/paper tray control panel

	1.	Ready to Open indicator
	2.	Please Wait indicator
	3.	Tray Unlock button
	4.	Paper Level indicators
Ready to Open	Glows green when the tray can be pulled out and paper can be
indicator	added to it.
Please Wait	Shows that the tray is in motion. This indicator is lit red when the
indicator	Tray Unlock button is pressed, while the tray is lowering, and while
	the tray is rising. The indicator goes off when the tray elevator
	reaches its destination.
Tray Unlock button	Enables the tray to be opened.
	•	If the tray is in use when this button is pressed, the feed
		selection switches to the backup tray if one has been
		identified. Otherwise, printing stops.
	•	If the tray is in use and selected as a backup tray, pressing the
		Tray Unlock button causes the tray elevator to lower and the
		tray to be unavailable for auto switching.
	•	If the tray elevator is in the raised position and the tray is not in
		use or selected as a backup tray, pressing this button causes
		the elevator to lower with no effect on printing operations.

This button functions when the Please Wait indicator is off.

DocuTech 128/155/180 HighLight Color Operator Guide 2- 9