Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer 3 Select a part, steps #2 - 4 above, 8Name the template, 1Enter the Song Mixing mode, 2Call up the desired display, 9Execute the Store operation

Sampling with Song Playback (Integrated Sampling Sequencer)

11. Song Mixing and storing the settings as a template

Reference (page 205)

In this final step (other than saving your precious work, which we’ll cover next), you can mix down your tracks with the Song Mixing function — adjusting the volume balance and pan setting of all the parts and tweaking the effect levels. Moreover, you can save your mixing settings as a template (up to sixteen templates can be saved), then call up the appropriate template when mixing down a song that has a similar track structure.

1Enter the Song Mixing mode.

SEQUENCER

SONG PATTERN FILE

INTEGRATED

SAMPLING MIXING UTILITY

3 Select a part.			1	2	3	4	5	6	7	8	TRACK
DEC/NO	INC/YES										SELECT
		or		ELEMENT/ PERF.PART / ZONE
			9	10	11	12	13	14	15	16	MUTE
EXIT	ENTER										SOLO

EXECUTE

nWhen a Multi part Plug-in board (PLG-100XG) has been installed to slot 3, the display for Parts 17 - 32 can be called up. When a Single part Plug-in board has been installed to any of the three slots, the PLG 1~3 part display can be called up.

4Select the desired parameter and adjust it.

DEC/NOINC/YES

EXIT ENTER

EXECUTE

2Call up the desired display.

	MODE
EFFECTBYPASS ARPEGGIO	BANK
	SEQUENCER
	GROUP
SEQ TRANSPORT
	NUMBER

SF1	SF 2	SF 3		SF 4	SF5		INFORMATION
F1	F2	F3	F4	F5		F6	5 Set the desired parameters
							for the other parts, repeating
							steps #2 - 4 above.
							nA wider variety of detailed editing
							controls is also available in the
							Song Mixing Edit mode.

6Call up the TEMPLATE display.7Select the destination template number.

Move the cursor to the template number and select the number to which the settings are to be stored.

SF1	SF 2	SF 3		SF 4	SF5	INFORMATION
						DEC/NO	INC/YES
F1	F2	F3	F4	F5		F6

EXITENTER

Template number

EXECUTE

Quick Start Guide

9Execute the Store operation.

	SF1	SF 2	SF 3	SF 4	SF5	INFORMATION
F1	F2	F3	F4	F5		F6

nThe template stored above can be recalled by pressing the [SF4] (GET) button from this display.

8Name the template.

Template name

DEC/NOINC/YES

EXIT ENTER

nFor details about naming, see page 75.

EXECUTE

MOTIF Quick Start Guide 117