Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer • Rate, • Rate, • Offset, • SetAll, • Offset, • Set All, Adjusted velocity, Adjusted gate time, ●[F2]-02 Modify Velocity, ●[F2]-03 Modify Gate Time

●[F2]-02 Modify Velocity

This job alters the velocity values of the specified range of notes, letting you selectively boost or cut the volume of those notes.

Velocity changes are calculated as follows:

Adjusted velocity= (original velocity x Rate) + Offset.

If the result is 0 or less, the value is set to 1. If the result is higher than 127, the value is set to 127.

TrackRange

• Set All

Sets the velocities of all target notes to the same fixed value (1 to 127). When set to “OFF” the Set All parameter has no effect. When set to a value other than “OFF” the Rate and Offset parameters are unavailable and appear as “***” on the display.

❏ Settings OFF(0), 001~127

• Rate

Determines the percentage by which the target notes will be shifted from their original velocities.

Settings below 100% reduce the velocities, and settings above 100% increase the velocities proportionately. When the Set All parameter is not “OFF” this parameter appears as “***” and cannot be changed.

❏ Settings 000% ~ 200%, ***

Original velocity	(Vel)
	96	64	48	32
Rate = 50%	(Vel)
	48	32	24	16
Rate = 150%	(Vel)
	127	96	72	48

• Offset

Adds a fixed value to the Rate-adjusted velocity values.

A setting of 0 produces no change. Settings below 0 reduce the velocities, and settings above 0 increase the velocities. When the Set All parameter is not “OFF” this parameter appears as “***” and cannot be changed.

❏ Settings -127 ~ +127, ***

Original velocity	(Vel)
	96	64	48	32
Offset = -20	(Vel)
	76	44	28	12
Offset = +20	(Vel)
	116	84	68	52

Song Job mode

●[F2]-03 Modify Gate Time

This job alters the gate times of the specified range of notes. Gate time changes are calculated as follows:

Adjusted gate time= (original gate time x Rate) + Offset.

If the result is 0 or less, the value is set to 1.

TrackRange

• SetAll

Sets the gate times of all target notes to the same fixed value. When set to “OFF” the Set All parameter has no effect. When set to a value other than “OFF” the Rate and Offset parameters are unavailable and appear as “***” on the display.

❏ Settings Off (0), 0001 ~ 9999

• Rate

Determines the percentage by which the gate time of the target notes will be changed.

Settings below 100% shorten the notes, and settings above 100% lengthen the notes proportionately. When the Set All parameter is not “OFF” this parameter appears as “***” and cannot be changed.

❏ Settings 000% ~ 200%, ***
Original gate time	(Gate)
	32		32	32	48	mode
Gate time rate = 50%	(Gate)					Song
		16	16	16	24	Reference
Gate time rate = 150%	(Gate)
		48	48	48	72

• Offset

Adds a fixed value to the Rate-adjusted gate time values. A setting of 0 produces no change. Settings below 0 shorten the gate time, and settings above 0 lengthen the gate time. When the Set All parameter is not “OFF” this parameter appears as “***” and cannot be changed.

❏ Settings	-9999 ~ +9999, ***
Original gate time
	(Gate)
	32	32	32	48
Offset = -20	(Gate)
	12	12	12	28
Offset = +20	(Gate)
	52	52	52	68

MOTIF Reference 195