• Tempo

Determines the Arpeggio Tempo. When MIDI sync (page 258) is turned on, “MIDI” is displayed here and cannot be set.

❏ Settings 1 ~ 300

• Velocity Limit

Determines the lowest and highest velocity in the Arpeggio’s velocity range. The Arpeggio plays when you play the note with the velocity in this range.

❏ Settings 1 ~ 127

nKeys played outside the set limit sound normally without any Arpeggio.

•Switch

Determines whether Arpeggio is on or off. You can also turn Arpeggio on/off from the front panel with the [ARPEGGIO ON/OFF] button.

❏ Settings off, on

• Hold

Determines whether the Arpeggio playback is “held” or not. When this is set to “on,” the Arpeggio cycles automatically, even if you release your fingers from the keys, and it continues to cycle until the next key is pressed.

❏ Settings off, on

Voice Edit mode

Voice Edit mode

In this mode, Normal Voices and Drum Voices can be created and edited.

There are three kinds of Voices: Normal Voices, Drum Voices and Plug-in Voices (if a Plug-in board has been installed). The following section shows how to edit the different kinds of voices and explains the parameters available.

◆The [ ] Indicator

If you alter any parameters in Voice Edit Mode, the [ ] indicator will appear in the top left of the display. This indicates that the current voice has been modified but not yet stored.

nEven if you exit to the Voice Play mode, your edited settings for the current voice will be maintained — as long as you don’t select another voice.

nThe [ ] indicator is also displayed in the Voice Play mode.

◆

The Compare Function

 

This convenient function lets you switch between the

 

mode

edited voice and its original, unedited condition —

 

allowing you to listen to the difference between the

Voice

two and better hear how your edits affect the sound.

1

In the Voice Edit mode, press the [COMPARE]

Reference

 

 

button so that its indicator flashes.

 

 

The [ ] indicator is shown at the top of the

 

 

display (in place of the [ ] indicator), and the

 

 

original, unedited voice is restored for monitoring.

 

 

EDIT

 

 

COMPARE

 

2

Press the [EDIT] button again to disable the

 

 

“Compare” function and restore the settings for

 

 

your edited Voice.

 

n While Compare is active, you cannot make edits to the voice.

Normal Voice Edit◆Common edit and Element edit

A Voice can consist of up to four elements (page 42). Use Common Edit to edit the settings common to all four elements. There are two types of Voice Edit displays: those for Common Edit, and those for editing individual elements.

MOTIF Reference 129