Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer Efect), Insertion), • TransmitCh, • Chorus Pan, • Chorus Type, • OutputSwitch, • Variation Pan, • Variation Type, • Variation Return, • Variation To Reverb

• OutputSwitch

When this is set to on, Arpeggio playback data is output from the MIDI terminal.

❏ Settings on, off

• TransmitCh

Determines the MIDI transmit channel for Arpeggio playback data.

❏ Settings 1 ~ 16

●[F4] Common Controller Assign

The controllers and knobs on the front panel can be used to change and adjust a variety of parameters — in real time, and simultaneously.

For example, you could use the ASSIGN 1 and 2 knobs to control effect depth for two different effects, while using the Foot Controller to control modulation. These control assignments are called “Controller Assign.” You can have independent Controller Assign settings for each performance.

Set the Control Change number for the Breath Controller.

The function set here can be controlled by the Breath Controller connected to the BREATH CONTROLLER (page 28) jacks on the rear panel.

Determines the Control	Determines the Control Change numbers
Change numbers for the	for Foot Controllers 1 and 2. To control
ASSIGN 1 and 2 knobs	these functions, connect Foot Controllers
on the front panel.	to the FOOT CONTROLLER jacks on the
	rear panel (page 28).

❏ Settings (See chart below)

Control Change Numbers

	LCD		LCD
00	off	32	off
01	ModWheel	64	Sustain
02	Breath	65	PortaSw
04	FootCtrl	66	Sostenut
05	PortTime	67	Soft
06	Data Ent	72	Release
07	MainVol	74	Bright
10	Panpot	75	Decay
11	Express	84	PortaCtl
16	General 1	91	Effect 1
17	General 2	92	Effect 2
18	General 3	93	Effect 3
19	General 4

Performance Edit mode

●[F6]-[SF1] Common Effect Connection

Basic Structure (page 40)

This display gives you comprehensive control over the effects.

• EF PART (Effect part) ➡ VCE INS (VoiceInsertion)

Determines the part to which the Insertion effect is applied. The Insertion connection type (page 40) depends on the voice of the selected part.

❏ Settings Part 1 ~ 4, Plug-in Part 1 ~ 3, off

• EF PART (Effect part) ➡ PLG-EF (Plug-inEfect)

Determines the part to which the Insertion effect is applied. This parameter is available only when a special Effect Plug-in board (VH) has been installed.

❏ Settings Part 1~4, Plug-in Part 1~3, A/D, off

• Variation Type

Determines the Variation effect type.

❏ Settings Refer to the Effect Types list in the separate Data List booklet.

• Variation Return		mode
Determines the Return level of the Variation Effect.
❏ Settings	0 ~ 127	Performance
• Variation Pan
Determines the pan position of the Variation effect sound.
❏ Settings	L64 (far left) ~cnt (center) ~ R63 (far	Reference
	right)
• Variation To Reverb
Determines the Send level of the signal sent from the
Variation Effect to the Reverb Effect.
❏ Settings	0 ~ 127
• Variation To Chorus
Determines the Send level of the signal sent from the
Variation Effect to the Chorus Effect.
❏ Settings	0 ~ 127
• Chorus Type
Determines the Chorus effect type.
❏ Settings	Refer to the Effect Types list in the separate
	Data List booklet.

• Chorus Return Level)

Determines the Return level of the Chorus Effect. ❏ Settings 0 ~ 127

• Chorus Pan

Determines the pan position of the Chorus effect sound. ❏ Settings L64 (far left) ~ cnt (center) ~ R63 (far right)

MOTIF Reference 169