Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer manual 65

Main functions

Remote Control to Computer Sequence Software

Quick Start Guide (page 119) · Reference (page 256)

When the [REMOTE CONTROL ON/OFF] button is turned on, the following buttons/controllers can control the Audio track mixer and sequencer transport of the computer sequence software connected to the MOTIF.

J∆

NUMBER button[1]~[16] Knob

These buttons are used to select the corresponding tracks of the computer sequencer software, or to turn those tracks on/off, depending on the on/off status of the [TRACK SELECT] button and [MUTE] button.

1	2	3	4	5	6	7	8	TRACK
								SELECT
	ELEMENT/ PERF.PART / ZONE
								NUMBER
9	10	11	12	13	14	15	16	MUTE

SOLO

[MUTE] button

When this is turned on, the NUMBER [1] - [16] buttons are used to turn the corresponding tracks of the computer sequence software on or off.

1	2	3	4	5	6	7	8	TRACK
								SELECT
	ELEMENT/ PERF.PART / ZONE
								NUMBER
9	10	11	12	13	14	15	16	MUTE
								SOLO

Adjusts the Pan, Effect send level, and Equalizer for each track of the computer sequencer.

	PAN	REVERB	CHORUS	TEMPO
	CUTOFF	RESONANCE	ATTACK	RELEASE
KNOB	ASSIGN A	ASSIGN B	ASSIGN 1	ASSIGN 2
CONTROL
FUNCTION
	KN 1	KN 2	KN 3	KN 4
	MEQ LOW	MEQLOWMID MEQ HI MID		MEQ HIGH

Basic Structure

Control Sliders

Adjusts the Volume for each track of the computer sequence software.

MASTER	VOLUME 1	VOLUME 2	VOLUME 3	VOLUME 4
VOLUME

CS 1		CS 2	CS 3	CS 4
ZONE	1	ZONE 2	ZONE 3	ZONE 4

[SEQ TRANSPORT] buttons

Controls the transport functions on the computer sequence

software.	SEQ TRANSPORT
	LOCATE	1	2
	REC

[TRACK SELECT] button

When this is turned on, the NUMBER

[1]- [16] buttons are used to select the corresponding tracks of the computer sequence software.

1	2	3	4	5	6	7	8
	ELEMENT/ PERF.PART / ZONE
9	10	11	12	13	14	15	16

TRACK

SELECT

NUMBER

MUTE

SOLO

MOTIF Basic Structure 65