Information Displays

Appendix

Information Displays

The convenient Information displays let you see at-a- glance some of the more important settings relevant to each mode. Select the desired mode, then press the [INFORMATION] button to call up the Information display for that mode. To exit from the display, press the button again (or any other panel button).

• InsPart (Insertion part), PLG (Plug-in Insertion part)

Indicates the part number to which the Insertion effect is applied and the part number to which the Plug-in Insertion effect is applied (when the PLG100-VH is installed).

• Rev (Reverb), Cho (Chorus), Var (Variation)

Indicates the currently selected effect type for each effect block (page 169).

■Voice mode

• Bank

Indicates the Bank/Number (page 124) of the currently selected Voice.

• EL 1234

Indicates the currently selected voice, on/off status of four elements and mono/poly (page 128) status.

• Porta (Portamento)

Indicates the Portamento switch on/off status of the currently selected voice.

• PB (Pitch Bend)

Indicates the Upper/Lower setting of the Pitch Bend range.

• Ins1 (Insertion 1), Ins2 (Insertion 2), Rev (Reverb), Cho (Chorus)

Indicates the currently selected effect type for each effect block (page 137).

■Performance mode

• Bank

Indicates the Bank/Number (page 162) of the currently selected Performance.

• 1 (Plug-in board 1), 2 (Plug-in board 2), 3 (Plug-in board 3)

Indicates the installation status of the respective Plug-in board. The Plug-in board name is displayed at the right of the corresponding slot number. When PolyExpand (page 259) is set to on in the Utility mode, “P” is indicated at the left of the slot number.

■Song mode

●Song Play mode

Indicates the amount of currently unused (available) memory (DRAM) for song recording.

●Song Mixing mode

• PlugInfo/Port (Plug-in board installation status)

Indicates the Plug-in board name and its MIDI port number (page 260) at the right of the slot number. When PolyExpand (page 259) is set to on in the Utility mode, “P” is indicated at the left of the slot number.

• InsPart (Insertion part), PLG (Plug-in Insertion part)

Indicates the part number to which the Insertion effect is applied and the part number to which the Plug-in Insertion effect is applied (when the PLG100-VH is installed).

• Rev (Reverb), Cho (Chorus), Var (+Variation)

Indicates the currently selected effect type for each effect block (page 210).

Appendix

MOTIF Appendix 275