●[F4]-04 Append Phrase

This Job appends one phrase to the end of another to create one longer phrase.

Phrase A

Append Phrase

Phrase B

Pattern Job mode

●[F4]-06 Get Phrase From Song

This Job copies a segment of sequence-track data from a song into the designated destination phrase.

 

Source song, track, and range of

Destination phrase

measures to be copied

When this box is checkmarked, sample voices used by the source track are copied to the destination style as sample voices, and are assigned to destination phrase. This parameter has no effect when no sample voice is used by the source track.

nIf this job is applied to phrases which use sample voices, the sample voices will not be appended.

The job overwrites any data already existing in the destination phrase.

●[F4]-05 Split Phrase

This Job splits a selected phrase into two separate phrases.

Phrase A is divided at the Split Point (the measure number set in the above display).

Phrase A

Phrase A

Phrase B

nWhen either Style or Phrase is set to “off”, the split Phrase B data is erased.

•Meter

Sets the meter of phrase B after the split operation. ❏ Settings 1/16~16/16, 1/8~16/8, 1/4~16/4

The job overwrites any data already existing in destination phrase B.

nIf this job is applied to phrases which use sample voices, the sample voices will not be split.

Undo/Redo (page 225) cannot be used to undo/redo a sample voice copy operation.

nWhen there is no memory available in the destination style for sample voice data, an error message will appear on the display and the sample voice data will not be copied. If this occurs, use Sample Job 02 “Delete” to delete any unused samples, then try again.

●[F4]-07 Put Phrase To Song

This Job copies a selected user phrase into a specified area of a selected song.

Destination phrase

Source song, track, and range of

measures to be copied

When this box is checkmarked, sample voices used by the source track are copied to the destination style as sample voices, and are assigned to destination phrase. This parameter has no effect when no sample voice is used by the source track.

The job overwrites any data already existing in the destination track.

Undo/Redo (page 225) cannot be used to undo/redo a sample voice copy operation.

nWhen there is no memory available in the destination song for sample voice data, an error message will appear on the display and the sample voice data will not be copied. If this occurs, use Sample Job “Delete” to delete any unused samples, then try again.

Reference Pattern mode

MOTIF Reference 229