Song Edit mode

•RPN MSB-LSB

❏Settings 000~127

•Data Entry MSB-LSB

❏Settings 000~127

nNormally three types of control change data are sent: RPN MSB (101), RPN LSB (100), and Data Entry MSB (6). In the MOTIF, Data Entry LSB (38) is added to this and the resulting group of control change events is handled as one in this display. For a complete list of the available RPN and NRPN numbers and their corresponding controls, refer to the MIDI Data Format in the separate Data List booklet.

■Non Registered Parameter Number (NRPN)

This event changes parameter values for each tone generator part.

This event is used to edit sounds via MIDI, allowing you to edit filter or EG settings, or adjust the pitch or level for each instrument of a drum voice.

For a complete list of the available NRPN numbers and their corresponding controls, refer to the MIDI Data Format in the separate Data List booklet.

RPN MSB-LSB

Data Entry

 

MSB-LSB

• NRPN MSB-LSB

Reference

❏ Settings 000~127

 

• Data Entry MSB-LSB

❏ Settings 000~127

Song

n Normally three types of control change data are

 

mode

sent: NRPN MSB (99), NRPN LSB (98), and Data

Entry MSB (6). In the MOTIF, this group of

 

 

control change events is handled as one in this

 

display. For a complete list of the available RPN

 

and NRPN numbers and their corresponding

 

controls, refer to the MIDI Data Format in the

 

separate Data List booklet.

■System Exclusive (Exc)

A type of MIDI message used to exchange data unique to a specific model or type of device.

Unlike with other MIDI events, these events differ depending on the manufacturer/device, and are incompatible among different devices.

Data

• Data

❏ Settings 00 ~7F, F7 (Data must be entered in hexadecimal format.

Event View Filter

The explanations here apply to step #3 of the Basic Procedure on page 189.

The MOTIF’s “Event View Filter” lets you select the event types that appear on the Event List display. For example, if you wish to edit only note events, place a checkmark in the box next to “Note” as shown below so that only the note events appear in the Event List display.

When the Control Change box is

Press the [F5] button

checkmarked, you can specify the

to remove all

desired Control Change number.

checkmarks at once.

Press the [F6] button to set checkmarks into all boxes.

192MOTIF Reference